JBsWear 2018 Catalogue

3M™ Scotchlite™ Reflective Material 3M™ Scotchlite™ Reflective Material – Fabrics are designed for use on safety garments and in athletic and casual wear. When properly used, 3M™ Scotchlite™ Reflective Material helps enhance the visibility of the wearer in night time or low-light conditions when illuminated by a light source, such as headlights, by returning the light back toward the original source and reaching the automobile driver’s eye. SAI Global Product Certification SAI Global Product Certification Services provides third party assurance that a particular product meets the specified requirements of a nominated product standard. SAI Global Standards-mark™ on the product represents reliability, quality assurance and safety. Kick Off Lugs At Heel Flex Zone Technology Anti-Static Composite Toe Cap COMP Oil Resistant Sole Bump Cap Shock Absorbent Heel Steel Toe Cap STEEL PU Injected Sole Polarised Polarized eyewear designed to reduce glare from surfaces such as water, snow, and glass. Anti Fog Treatment that prevents the condensation of water on lenses creating the illusion of fog. Recycled Products that are or can be recycled and made suitable for re-use. EN388 Mechanical Risks Rating: EN388 standard covers 4 main areas of concern for mechanical hazards, and these areas are graded by a number, as per the table below: 1 is the lowest rating, and highest rating as below. EN388 4 1 3 1 EN511 Cold Protection: EN511 standard measures cold protection. This standard applies to any gloves to protect the hands against convective and contact cold down to -50 degrees Celsius The pictogram will be accompanied by a 3 -digit code Category 2 - Intermediate Gloves of intermediate design, for intermediate risks. Benchmark Product Certification BSI Group ANZ Pty Ltd (BSI) has developed the BSI Benchmark Product Certification Criteria (Benchmark) for manufacturers and suppliers of product certification products supplied into the Australian market. The Benchmark Brand belongs to BSI and is an accredited JAS-ANZ product certification scheme. Hi Visibility – Night The garment is highly visible in the Night. Hi Visibility – Day & Night The garment is highly visible in daylight and features reflective material for heightened night-time visibility. Australian Standards AS/NZS:1906.4:2010 AS/NZS:4602.1:2011 Day & Night Australian Standards AS/NZS:4602.1999 AS/NZS:1906.4:2010 Day & Night Australian Standards AS/NZS:1906.4:2010 AS/NZS:4602.1:2011 Day & Night Australian Standards AS/NZS:4602.1999 AS/NZS:1906.4:2010 Day & Night Hi Visibility – Day Only The garment is highly visible in the daylight. PRODUCT ICONOGRAPHY 7 EN511 X 2 X A: Resistance to Abrasion B: Blade Cut Resistance C: Tear Resistance D: Puncture Resistance • The first digit is for resistance to convective cold (performance level 0 -4) • The second digit is for resistance to contact cold (performance level 0 -4)The higher performance level the better insulating capacity. • The third digit is for permeability to water (performance level 0 or 1) 0 = water penetration after 30 minutes 1 = no water penetration after 30 minutes. Where not suitable or tested an “X” is marked 1 to 4 1 to 5 1 to 4 1 to 4 TPU/PU Sole Construction